Microlab X27
Published by Bogdan Alex, on June 5th, 2008, in the categories: Microlab

Microlab did a pretty good job going for an ultra sleek look for this system. The casual movie watcher will be pleased with this one, but Microlab actually recommends it for serious audiophiles. The system features slim front and surround speakers that are perfectly suited for either floor-standing or wall-mounted applications. Each satellite integrates a high-quality 1” domed-tweeter flanked by twin 3”midrange drivers designed by Mr. Peter Larsen. Profound bass frequencies are smoothly handled bya responsive 8” subwoofer. The system also comes standard with a remote control and digital display to facilitate a more comfortable interaction.
Here are some other important features:
- Volume is controlled by 6 channels motor potentiometer
- A perfect acoustic effect could be reached if connected to the
audio source with AC-3 or DTS decoder.
- Enhanced subwoofer with acoustic Air Flow Design to reach
a powerful bass performance.
- Magnetically shielded satellites.
Additional tech specs include:
- Power Output: 110W + 32Wx5 RMS
- Frequency Response: Subwoofer 20Hz~150Hz
Satellite 150Hz~20KHz
- Input Sensitivity : 380mV
- Harmonic Distortion: 0.3% 1W 1KHz
- S/N: >80dB
- Separation: >40dB
- Speaker unit: Subwoofer 8" 4Ω
Satellite 3" 4Ωx2 +1" 6Ω (magnetcally shielded)
- Audio Input: RCA
- Audio Output : Socket
- Product size:(DxWxH)
(Subwoofer) 500x205x350mm
(Satellite) 110x100x280mm
Microlab commercializes its products in Europe mostly. The X27 system costs around $417.
If you liked this post, subscribe to our blog by filling your e-mail address below:
Want to add something? Post your comments