Omen Bookshelf Speakers by ZU Audio
Published by dipti, on December 25th, 2011, in the categories: ZU Audio
If you look at the past few decades of the speakers, you will get to know that they have become much more complicated and less efficient. Especially bookshelf category speakers have suffered the most. Thanks to ZU Audio that has created Omen Bookshelf speakers that can offer a lot irrespective of its size.
As the name suggest, Omen speakers has been designed to utilize small spaces like Bookshelf etc. Being small in size, this speaker delivers almost same level of audio performance that we expect from floor standing speakers. Main objective of Omen is to create simple loudspeakers that occupy less space and deliver outstanding sound having amplifier, solid look and affordable price tag. The design is robust and can be used for lifetime. Its cabinet material, assembled drivers and every other quality part helps in creating a speaker that will keep amazing our generation over decades. Core part of Omen Bookshelf speaker is 10” full range driver along with high frequency diffusion located at the face of pole piece.
Colour and finishing of ZU Omen speaker is simply unique. It is hand finished using colour die to give deep 3 dimensional look. You can find different colour speakers like Honey Walnut, Sangria Red and Ghost Black. However by paying some extra amount you can ask for custom finishes that has automotive painting schemes. It measures 18 inch tall, 12 inch wide and 12 inches deep. It weighs 30 pounds per piece due to its solid MDF construction. Frequency response of Omen Bookshelf speaker is between 50 to 25,000 Hz and does not have any crossover. It has an efficiency rate of 98dB along with 12 Ohm load. People may be amazed by the super bass of such a small bookshelf speaker but in order to experience full range performance one subwoofer is required. ZU Omen speaker looks stunning and are capable of playing loud music irrespective of their small size. I am sure that once you set up this speaker in your room, you will not be concerned about the space.
Quality and construction of Omen Bookshelf is of first grade and since it’s finishing is unique and glossy, appearance wise it is far more superior to any other product of Omen speakers. Omen is among such few brands that does not outsource any of the speaker parts, not even the cabinet. Music wise Omen Bookshelf speaker is enough to fill medium size room with its sound. Other than positive features of this speaker, there are some negative aspects too. You cannot expect this bookshelf speaker to handle larger rooms where it will deliver harsh sound, something not pleasant for music lovers.
Omen ZU speaker will definitely face the challenge and competition in the market. In order to be at the top, some changes need to be done like subwoofer and stand can be taken as starting point for modification. But all said and done, Omen ZU Bookshelf speakers are worth buying if you want to enjoy good music sitting in your cosy room.
As the name suggest, Omen speakers has been designed to utilize small spaces like Bookshelf etc. Being small in size, this speaker delivers almost same level of audio performance that we expect from floor standing speakers. Main objective of Omen is to create simple loudspeakers that occupy less space and deliver outstanding sound having amplifier, solid look and affordable price tag. The design is robust and can be used for lifetime. Its cabinet material, assembled drivers and every other quality part helps in creating a speaker that will keep amazing our generation over decades. Core part of Omen Bookshelf speaker is 10” full range driver along with high frequency diffusion located at the face of pole piece.
Colour and finishing of ZU Omen speaker is simply unique. It is hand finished using colour die to give deep 3 dimensional look. You can find different colour speakers like Honey Walnut, Sangria Red and Ghost Black. However by paying some extra amount you can ask for custom finishes that has automotive painting schemes. It measures 18 inch tall, 12 inch wide and 12 inches deep. It weighs 30 pounds per piece due to its solid MDF construction. Frequency response of Omen Bookshelf speaker is between 50 to 25,000 Hz and does not have any crossover. It has an efficiency rate of 98dB along with 12 Ohm load. People may be amazed by the super bass of such a small bookshelf speaker but in order to experience full range performance one subwoofer is required. ZU Omen speaker looks stunning and are capable of playing loud music irrespective of their small size. I am sure that once you set up this speaker in your room, you will not be concerned about the space.
Quality and construction of Omen Bookshelf is of first grade and since it’s finishing is unique and glossy, appearance wise it is far more superior to any other product of Omen speakers. Omen is among such few brands that does not outsource any of the speaker parts, not even the cabinet. Music wise Omen Bookshelf speaker is enough to fill medium size room with its sound. Other than positive features of this speaker, there are some negative aspects too. You cannot expect this bookshelf speaker to handle larger rooms where it will deliver harsh sound, something not pleasant for music lovers.
Omen ZU speaker will definitely face the challenge and competition in the market. In order to be at the top, some changes need to be done like subwoofer and stand can be taken as starting point for modification. But all said and done, Omen ZU Bookshelf speakers are worth buying if you want to enjoy good music sitting in your cosy room.
Zu Essence Loudspeaker
Published by dipti, on April 13th, 2011, in the categories: ZU Audio

One of the best qualities of a good speaker is that they should make you feel the music as it is. But sometime people fail to judge good quality speaker and spend unexpected price for trash. Zu Essence Loudspeakers are the best bet if you actually cherish nice sound quality.
In the last decade, you might have seen that speaker designs are made keeping in mind the great accuracy, low distortion and higher resolution but with such little features, you can not make a good quality speakers. Zu’s designer never sticks themselves to normal speaker designs. They always look for doing something extraordinary in this field and that’s why they came up with Zu’s quality speakers.
Zu’s designers have discontinued producing old models including Zu Druid I. If you see from the front, it looks like having same size as that of Druid. It has got 49 inch height, 12 inch width and depth is nearly double the Druids. A newly launched tweeter that has 2.5 inch foil ribbon unit is upgrade version of Druid’s piezo tweeter. All 10.3 inch parts of paper cone woofer are made in the America but they are assembled at Zu workshop. If we compare, it is similar to Druid woofer that is having number of refinements. This speaker does not have crossover network and because tweeter comes in high frequency range, so maximum sound comes from the woofer. As soon as they get assembled, both woofers and tweeters are tested exclusively and sorted into pair. Best thing with Zu’s speaker is that instead of following typical wire binding concept, Essence got copper clamp to secure cables of this speaker. While reviewing Essence, different brand of cables were used but when it was hooked up with ZuLibtec speaker cable, Essence was at its best and using Zu interconnect cables, sound quality gets more clear and sharper.
Essence is entirely different and has got distinct design. Paint used on it includes Diamond Dust Black and Diamond Dust. You can go for any kind of shade like metal flake, pearl, gloss, iridescent etc on your speakers. Due to small ribbon tweeters, vertical dispersion of Essence is limited means if any person stood up, he may lost treble of the sound.The designs are so perfect that these speakers’ looks like gangbusters. The soundstage of Essence is spacious as it follows stereo ideal and according to great speaker designers, stereo is combining form of ‘solid’, ‘solid body’ with unique recording quality and this is what Essence has got. In earlier Zu speakers like Druid, ZuRG system was installed by using absorptive material and fastening it with inner cabinet walls but the new approach of putting foam portion in middle is far better as with this concept one can tune up to much wide range of frequencies. Another difference between old and new model is that of refinements. Dual-cone unit is assembled with Zu and this product proves to be much consistent at the time of manufacture.
You might have noticed that there are end number of companies manufacturing speakers, woofers, sub-woofers each delivering different quality that is why it gets quite difficult to select the best among the rest but little bit of study on the internet is enough to get you what you actually are looking for. However, as far as the ZU Essence speakers are concerned they are a safe bet.
ZU Druid MK4
Published by Bogdan Alex, on June 25th, 2008, in the categories: ZU Audio
OK, so those pricey speakers are cool, but you actually need something more down to earth. I feel you, people, and here’s what I found for you. A pair of floorstanders that boasts cool specs and is sort of affordable for the average audiophile. Straight from ZU Audio, I give you the Druid MK4 system.
Druid MK4 is actually a complete rework of our ground-breaking Druid loudspeaker and features a proprietary super-tweeter CNC machined from billet aluminum. ZU wanted to provide hi-fi sound for budget audiophiles and decided to include their own B3 silver alloy internal cabling. They have also reengineered the inner connector-to-cable-to-voice-coil termination with the elimination of solder joints. Furthermore, they have raised the tolerance levels on the Zu260FR-G2 driver and the appropriate motor.
The new ZU-T1super-tweeter was reinforced with a high pass network and silver alloy leadouts. Additionally, the super-tweeter leadouts have been shortened to 25cm and terminated directly with the main B3 harness at the voice coil.
All these improvements give the Druid MK4 an increased resolution, bass extension, better amplitude linearity with reduced noise, overall better sound detail, soundstage depth and texture, more instrument color and a playback presence that really recreates the dynamic range of a live performance.
The Druid MK4 can be purchased directly from the ZU Audio online page for $3,400/pair. For more details and tech specs, check out this PDF document.
Druid MK4 is actually a complete rework of our ground-breaking Druid loudspeaker and features a proprietary super-tweeter CNC machined from billet aluminum. ZU wanted to provide hi-fi sound for budget audiophiles and decided to include their own B3 silver alloy internal cabling. They have also reengineered the inner connector-to-cable-to-voice-coil termination with the elimination of solder joints. Furthermore, they have raised the tolerance levels on the Zu260FR-G2 driver and the appropriate motor.
The new ZU-T1super-tweeter was reinforced with a high pass network and silver alloy leadouts. Additionally, the super-tweeter leadouts have been shortened to 25cm and terminated directly with the main B3 harness at the voice coil.
All these improvements give the Druid MK4 an increased resolution, bass extension, better amplitude linearity with reduced noise, overall better sound detail, soundstage depth and texture, more instrument color and a playback presence that really recreates the dynamic range of a live performance.
The Druid MK4 can be purchased directly from the ZU Audio online page for $3,400/pair. For more details and tech specs, check out this PDF document.


PAGES