Firstly you will require a soldering iron, some solder wire and another pair of unused headphones. The reason we would require for another pair of headphones is to make use of the wires and the connector in case your expensive headphones have a bad wire or connector, thus needing replacement. Needless to say, other tools like screwdrivers, wire strippers and a sharp blade or knife will definitely come in handy. So once you’ve collected the materials required, get your favorite pair of headphones ready and start with finding the cause of the faulty connection.

Identifying Fault in the Headphone

Identify the area of the fault; if there is a break in the wire, it is best to replace the whole wire from your headphones with a new one or taken from another set of headphones. In case of any fault at the connector ends the solution is to cut the wire, buy another connector and solder the wires to the new connector. Thirds, in most cases, sound is audible over only one side of the headphones as the soldering wears off with time or the wires have given way. Due to this, the functionality of the headphone is drastically reduced, but with a few simple methods mentioned below, you will get the sound back from both sides in no time.

One important thing to keep in mind is that, before opening a headphone you should carefully examine the headphones and wiring. In most cases, the drivers are concealed in a frame, which is either glued together, fused as one piece, have clamps or simply screwed together.  In case you find the drivers fused inside a case, you might need to cut open the frame. If needed, get some help from someone who knows a bit of electronics.

Disassembling the Headphones

Once you have gotten into the inside of the headphones, check if the existing wire has become loose. If it has, then a bit of soldering should suffice. If it is worn out, then you will need to change the wire completely. This is why we need the other pair of unused headphones for transferring its wires.

Soldering the Wires

The wires are always coated with a layer of a lacquer to prevent a short circuit. This lacquer needs to be scrapped off before soldering it to the terminal. To do this, use a very sharp blade or knife and very carefully and delicately scrape off the lacquer from the wire strands. If you apply too much pressure, the wire will break and you will end up with a shorter wire. Once that is done, coat the scraped ends with solder. This process is called tinning of copper.

Once you have soldered the wires, check if the headphones are working and reassemble the headphones.

If you are an avid gamer, then you must be concerned about graphics, textures, animation and the most important thing Sound in a good game. Any game that you are playing whether it is on pc, play station or any other device, sound can add important aspect to game. Sound is one the important thing to be noticed when playing game as this can make or break the atmosphere of a good game.  And to make a good environment when playing game all you need is a best gaming headphones. Best gaming headphones can translate the great sound production of your video games into a better gaming experience. Mentioned below are some of the best gaming headphones that you can choose from.

Best Gaming Headphones:

1. Logitech G35: It is a good option for gamers. These headphones are a perfect combination of great sound input and output with dependability. The headset can reduce annoying background noise for clear, intelligible voice commands. The ear closing design of this headset helps to shield you from interruptions and immerses you in the game.  Moreover the attached microphone also reduces annoying background noise for clear, intelligible voice commands. This headset comes with exchangeable head bands that can be adjusted for your comfort. Logitech is one of the reputed and established brands in the gaming accessories.

2. Koss PortaPro Headphones: These headphones are great combination of functional design with excellent 3D sound and a low price tag. These headphones features dynamic element that offer exceptionally rich, deep bass and a remarkably wide frequency response. The elements inside this headphone reduce the distractions and ensure great and accurate sound reproduction. The main feature of these headphones which makes them extraordinary is the comfort zone temporal pads. The two adjustable pads which shift the pressure and perfectly balance the ear plates on your ear.  The adjustable headband of these headphones provides a very comfortable fit. These headphones come with 0.25 adapters that guarantee its compatibility with any system.

3. Bose Quiet Comfort headphones: These headphones are smaller and fit on your head well. The headphones feature compact design, a rechargeable battery, extra comfortable cushy foam earpieces and effective noise canceling circuitry. The headphone reduces annoying background noise and offers improved clear sounds.

4. Sennheiser HD 280 headphones: These headphones offer you professional quality output. This headphone comes with 9 foot detachable cord which is made of high quality copper. The headphone has the ability to reduce distracting background noise and produce clear and great sounds.

If you wish to have gaming headphones with excellent audio quality then you can definitely go for any of the above mentioned headphones. Along with these, there are many other best gaming headphones such as Microsoft lifeChat LX-3000 Headset, Konnect –Xbox 360 large Style headset, Nokia BH-905 High performance Bluetooth stereo headphones and many more.

Electronic gadgets that help in reducing unwanted ambient sounds by means of active noise control are referred to as noise cancelling headphones. The mechanism, active noise control is referred to as ANC in general terms. The process involves using one or more microphones placed near the ear. The electronic circuitry uses the microphone to generate an antinoise signal. Once the speaker driver produces the antinoise signal, the destructive interference cancels the ambient noise which is heard within the enclosed volume of the headphone.

It was during the late 1970s that the first noise-cancelling headphones were developed by Dr. Amar Bose, founder of Bose Corporation.  At present, most noise cancelling headsets use the analog technology.

Advantages

• The biggest advantage on noise cancellation headphones is that they reduce unwanted ambient sound.
• They are very effective while one is travelling. The headphones significantly reduce the whoosh of air-conditioning systems and other background systems as well.
• The headphones also have an effective passive isolation from rising frequency.
• They are used by frequent air travelers for subduing the noise inside the aircraft.

Types of Headphones

There are two types of headphones, Passive Noise-Cancelling and Active Noise Cancelling Headphones. Passive Noise Cancelling Headphones generally use the soundproofing substance used in bars.

On the other hand, active noise cancelling headphones use both active and passive means to filter out noise. The passive part of the gadget comprises high-density foam material that cancels the high-frequency noise. The active part keeps a check on the low frequency sound.

Noise Cancelling headphones come in all forms, from ear buds to full size. Some of the best known Noise Cancelling headphones are listed below:

Bose QuietComfort 15

No bargains in this regard. The Bose QuietComfort offers the best sound and silencing capabilities. The gadget is designed  to provide extra comfort, improved sound along with highly-effective noise cancelling circuitry. It can be folded for compact storage. It comes along with a carrying case.

Bose QuietComfort 3

With this gadget Bose has been successful in shrinking the popular noise-cancelling headphones and achieving similar impressive sound quality. These are smaller in size with cushioned earpieces, rechargeable batteries, effective noise cancelling circuitry and full sound. The can be easily folded up for carrying conveniences.

Audio Technica ATH-ANC7

This comes with a reasonable price tag. Excellent sound quality and above average noise cancellation make this noise cancellation headphone a preferred one. The full sized headphones come with comfortable leather cushioning which makes it comfortable to wear for hours together. This headphone comes with a large carrying case with a single detachable wire easy to take on and off. When the noise cancellation is switched on it emits superior sound quality.

Plane Quite Platinum

These make a good companion for long haul flights. The large size of the headphone and the leather surrounding it makes Plane Quiet Platinum one of the most comfortable of all headphones. The headphone emits above average sound quality by balancing bass and higher sounds. Located on the cord, the noise cancellation switch is large, which might be a little bothersome.

Noise Cancellation Headphones are of great use when it comes to the reduction of unwanted ambient sounds. Though slightly expensive, these gizmos are of much help.

With all these types of speakers you can enjoy some music, a movie, a game or whatever you like, and the sound will be spread through the room. So you will be able to hear it, but also your neighbors and the persons from other rooms or the house. But what can you do if you want to enjoy your favorite music, at a loud volume, without disturbing the people around you? The answer is simple: use some headphones. These are small devices that will fit in or on your ear, and they will give about the same quality and power of the sound, but only to the listener. Most of the headphones today are featuring some noise canceling technologies, so you will listen only to the sound from the speakers, and not anything else from the environment. Most of the people were using the headphones when they wanted to communicate with other people over the internet. They just plugged the headphones in, so that nobody else will listen to the conversation. But beside the headphones to hear the sound, they also had to use a separate microphone to talk with the other person. So that’s people thought of a method to hear and speak at the same time, using the same device. So this is how the headsets appeared.

As you can see it looks really good, and it also sounds amazing. Like the name says, this headset is made specially for gamers. In a video game, especially in the shooter games, it is really important to hear everything, every move and gun shot made by the opponent. Just a fraction of a second can make the difference between the winner and the loser, so that’s why it is really important to have the best sound quality. Using this headset, not only that you will hear all the moves and shots, but you will literally feel like you are in the game. The headphones are specially designed to fit comfortably on your ears, even when you wear them for a long period of time. They are also made to eliminate the ambient noise, so you will be able to focus just on the game. Like any headset this also has a microphone that is pretty large meaning that it is also very good, and you will easily be able to talk with your game partners.

Another great headset is the Logitech G 35 7.1

As you can see this also looks very good and will easily fit on your ears. The headband is swappable so you can adjust the headset to the size of your head, for more comfort. This is the first headset from Logitech that offers 7.1 surround sound. More and more games are featuring this characteristic, so these speakers will be perfect when combined with a game of this type. So it means that these headphones will give you a great surround sound, and you will have just the sensations as when you are using a 7.1 system. You will be able to hear the enemy exactly where it is, for example behind you, or in the left rear side.

Both the headphones and microphone have noise canceling technologies, so in the headphones you will hear just the sound from the computer, and not anything else and the microphone will give just the sound of your voice and reduce the background noise.